Skip to content
FixAhead
Menu
Log inStart freeStart free

Workplace safety inspection checklist

Walk-through, shift, monthly and annual checks of walking surfaces, exits, fire protection, electrical, machinery and postings.

Each shift

TaskRequiredPhoto required
Electrical
Cords and cord-connected equipment free of damage; no splices; no multiple-plug adaptorsYes
Ladders and stairs
Ladders free of visible defects, checked before first use in each shiftYes
Forklifts
Each forklift examined before it is placed in service; defects reported and correctedYes

Routine walk-through

TaskRequiredPhoto required
Housekeeping and walking surfaces
Workplace clean, orderly and sanitary; floors kept dry where feasibleYes
Spilled material cleaned up immediatelyYes
Aisles and walkways clear; stored material does not project into themYes
Floor holes and damaged surfaces repaired, or guarded until repairedYesYes
Combustible scrap and waste removed promptly; oily rags kept in covered metal cansYes
Exits and emergency
Exit routes free and unobstructedYesYes
Exit doors open from inside without a key or tool, and are not blockedYes
Exit signs visible and lit; route marked where not obviousYes
Evacuation routes and emergency phone numbers posted
Electrical
Clear working space kept in front of panels, with nothing stored in itYes
Panel, box and receptacle covers in place; unused openings closedYes
Disconnects and breakers labelled for the equipment they serve
Ladders and stairs
Defective ladders tagged 'Dangerous: Do Not Use' and removed from service when foundYes
Handrails on stairs with four or more risersYes
First aid and eyewash
First aid kits accessible, stocked, inspected and replenished
Eyewash or drench facilities within the work area where corrosives are usedYes
Hazard communication
Safety Data Sheets current and accessible for every hazardous chemicalYes
Shipped and workplace containers labelledYes
PPE
Required PPE provided, in good condition, sanitary and usedYes
Hard hats inspected for shell and suspension damage
Machinery
Guards in place on rotating and moving parts and points of operationYes
Each machine has a power shut-off within the operator's reach; emergency stops are red
Postings
Job safety and health poster posted, or the state's equivalentYes

Monthly

TaskRequiredPhoto required
Fire protection
Extinguishers in place, accessible, charged, nozzle clear; monthly visual inspection recordedYes
Exits and emergency
Emergency lighting tested for 30 secondsYes

Annually

TaskRequiredPhoto required
Energy control
Periodic inspection of each lockout and tagout procedure, by an authorized employee other than the people who use itYes
Exits and emergency
Emergency lighting tested for 90 minutesYes
Fire protection
Annual maintenance check done, with its date recorded on the extinguisher tagYesYes
Postings
Injury and illness summary (Form 300A) posted February through AprilYes

This checklist is a starting point, not a compliance test. Where a state's own workplace safety rules, a fire authority, or an equipment maker's manual sets a stricter rule or a test, it governs instead.